Mineral Exploration

Spring 2014

Mineral Exploration is the official publication of the Association of Mineral Exploration British Columbia.

Issue link: http://digital.canadawide.com/i/264766

Contents of this Issue

Navigation

Page 41 of 51

42 s p r i n g 2 0 1 4 illustration : Heather Brown R eceiving a health and safety award is an achievement for any mineral explora- tion company, but being a recipient two years in a row is doubly rewarding. BHP Billiton Canada Inc. was presented the Safe Day Everyday Gold Award at a special breakfast dur- ing AME BC's Mineral Exploration Roundup in 2013 – and again in 2014. A ME BC and the Prospectors & Developers Association of Canada jointly present annual awards to encourage lead- ership in mineral exploration health and safety. BHP Billiton was recognized for having attained 391,549 person hours without a lost-workday incident in 2011, and for achieving 560,440 person hours without a lost workday incident the fol- lowing year. The awards have reinforced the safety commitment of BHP Billiton's potash exploration team in Saskatchewan, says exploration manager John McElroy. As anyone familiar with the province's weather extremes can attest, working outdoors poses risks and hazards that require special attention. "It means being prepared for heatstroke in the summer and hypothermia in the winter," McElroy adds. BHP Billiton holds roughly 14,500 square kilometres of potash exploration ground in Saskatchewan, and is also advancing the Jansen project located approximately 140 kilometres east of Saskatoon. Exploration is focused on finding similar resources to those at Jansen, described by BHP as "the world's best undeveloped potash resource." McElroy says two main types of pot- ash exploration take place on a roughly 50/50 basis: seismic programs that require putting a lot of individuals in the field to lay out sensors for surveys; and deep drilling using rigs of the type used in the oil industry. "Most of this work is done in winter for ease of access on winter roads and to not interfere with farmers in summer," McElroy says. "We have to cover large areas – between 6,000 to 7,000 square kilometres for seismic – and drill up to 1,200-metre holes, as the potash basin ranges between 900 and 1,100 metres." For seismic programs, McElroy says the main safety risks involve transport- ing crews and equipment over wide- spread areas. Drilling poses its own risks, such as handling steel rods and explosives, and moving and setting up oil-industry-type rigs. McElroy says the overall safety perfor- mance has improved steadily since explo- ration programs began six years ago. "In the past, we had issues such as slips and falls and other injuries, particularly when there was lots of ice and snow. But we've put in a lot of effort to eliminate the need to carry heavy equipment and the need to work in deep snow, and that seems to have eliminated most of the risks." Because teams work in remote and sparsely populated areas, measures were introduced to reduce driving hazards, Safety first, year after year BHP Billiton sets a safe examPle for PotasH exPloration By ViVian Danielson Always wear safety glasses when hammering rock! >> HealtH & safety p42-43_Safety.indd 42 14-02-14 3:04 PM

Articles in this issue

Archives of this issue

view archives of Mineral Exploration - Spring 2014